There are home care and repair mistakes that probably you won’t realize you’ve made. Here are a few home mistakes that you need to avoid as possible sooner.
1. Never changing the furnace filter
Clogged air filters are usually to blame when a furnace stops working. Dirty air filters are also hard on blower motors and heat exchangers, so it’s a good idea to replace your air filter before there’s a problem. It can be hard to remember to check it regularly. That’s where an air filter gauge can help; it eliminates guesswork by measuring airflow and telling you exactly when it’s time to change your air filter.
2. Knocking down a load-bearing wall
In older frame houses, homeowners are often tempted to remove walls and create a more open floor plan. The danger is, if the wall that’s removed is a load-bearing wall, the second floor might end up falling onto the first! If you’re not sure, have an inspector determine if it’s safe to remove the wall.
3. Forgetting to read the installation manual
After installing a garage door opener, and spending hours trying to figure out why it wouldn’t work, one frustrated DIYer learned a tough lesson. His neighbor came over, picked up the manual that came with the opener, and called the manufacturer’s helpline. After one simple question, the customer service representative solved the problem. He asked if the cover was on the opener because it won’t work until the cover is on. That was the problem. The lesson? No matter what you’re installing, read the manual, keep the manual and use the customer service helpline if you have any problems.
4. Never Checking the Thermostat
Did you know that you can save money on your energy bills by monitoring and setting your thermostat? Simply reset your thermostat at night and when you are away from home. According to the U.S. Department of Energy, “you can save as much as 10 percent per year on heating and cooling by simply turning your thermostat back seven to 10° for eight hours a day from its normal setting.”
5. Never checking the power on the furnace
Make sure the power is on! The power switch for your furnace looks like a regular light switch and can get bumped and turned off accidentally. If the switch is off, just flip it back on.
6. Starting up the AC without doing this
On the first hot day in spring or summer, what will you do if you turn on the A/C and it doesn’t work? Don’t make the mistake of calling a service technician before you check this common oversight. Move the thermostat mode switch from ‘Cooling’ to ‘Off’ and move the fan switch from ‘Auto’ to ‘On.’ Let the blower run for at least 30 minutes or until there’s good airflow at the registers. Then turn the A/C back on to test it. If it keeps working, you’ve fixed the problem yourself!
7. Painting glossy paint on a bad surface
You may love the look of high-gloss paint, but if you apply glossy paint to surfaces that aren’t perfect, the paint will accentuate the problems. Light-reflecting off the shiny paint will highlight every defect. So if you want to paint with a semigloss or gloss sheen, make sure the surface you’re painting is carefully prepared and perfectly smooth.
8. Painting the Ceiling Without Wearing a Hat
When you roll paint on a ceiling, little splatters of paint go everywhere and many will land on your head, not the biggest deal but it is a pain to clean up. Wear an old hat and expect it to be covered with paint specks when the job is done.
9. Making Rookie Mistakes
Two common first-time painting mistakes:
1. Leaving the lid off of the paint can. The most obvious problem with this bad habit is that someone is bound to step on the lid and track paint all over. But there are other reasons to put the lid back on immediately. It’ll keep your paint clean and prevent dried-out paint crud from forming in the can or on the lid. Plus, you’re less likely to get the lids from two similar colors mixed up, which can cause hassles later.
2. Forgetting to lock out pets. Here’s what can and does happen—you step out of the room you’re painting and pretty soon your dog is in there sniffing around. He grabs the paintbrush handle in his mouth and carries it, dripping, across the house to give it back to you, leaving painted paw prints in his path. Avoid all pet-related painting problems by keeping your pets locked away from the project at all times.
10. Fertilizing at the wrong time of year
If you fertilize your lawn only when you think it needs it, when you have time, or when fertilizer is on sale, you may be wasting time and money. Fertilizers need to be applied at certain times during the growing season.
11. Never resetting your ice maker
When you clean your refrigerator and freezer before leaving for a period of time, be sure to replace the ice tray. If you don’t, the ice maker doesn’t get the signal that the tray is full, so it keeps making ice until the freezer is full! The next time you open the door, watch out! Also, some ice makers have a lever you can lift to make sure no ice is made while you’re away.
12. Never cleaning your dryer lint screen
If your gas clothes dryer isn’t getting your clothes dry, the culprit is often a lint-clogged vent. Use a vacuum and/or a brush to clean out the lint and the dryer should work fine unless you accidentally shut off the gas valve. Service technicians see this all the time. Someone gets in there and cleans out all of the lint, pushes the gas valve closed without knowing it, and ends up calling a technician. All they have to do is reach in and turn on the valve, and charge you for the service call.
13. Never changing the thermostat batteries
If your home is still chilly after turning up the thermostat and checking to make sure the furnace is on, try changing the thermostat batteries before you call a technician. Programmable thermostats have batteries and it’s easy to forget to replace them regularly.
14. Forgetting crucial installation steps
Installing a new garbage disposal is a perfect DIY project. You don’t need lots of tools, you get the satisfaction of solving the problem without hiring a pro, plus you save a bundle of cash. There’s just one very important thing that may not be mentioned in the installation instructions: You have to remove the factory plug from the drain line that runs to the dishwasher. If you don’t remove this plug, your dishwasher won’t be able to drain.
15. Cutting off the wrong end
This is a classic mistake. You have a door that needs to be trimmed to clear new carpet or some other flooring change. You remove the door, put it on sawhorses, measure carefully and make the cut. When you go to reinstall the door you realize you’ve cut off the top of the door instead of the bottom. Always put a mark on the bottom of the door before you remove it and look for that mark before you start to cut.